Description

This custom product handling system joins the 3115 Wipe-On with a Model 3139 and its 360° vacuum drum applicator. The wipe-on unit dispenses two separate labels onto the cylindrical vacuum drum. As the pallet moves into position, the labeling system’s arm swings in front of the pallet applying the first label to the front side. Upon completion, the drum re-orients to place the second label to a pre-determined location on the side panel of the pallet. After the pallet passes through, the arm swings back to its original position to receive two more labels and is soon ready to label the next pallet. This labeling system’s label placement accuracy is within +/- 1/8″ (3.2 mm). The system is very versatile in that it can also be adapted to print-and-apply use by switching out the primary applicator with a Label-Aire printer applicator.

SPECIFICATION 

•  Dimensions: 

          Height: 33.3″ (846 mm)
          Length: 33.3″ (846 mm)
          Width: 28.6″ (726 mm)

• Dimensions:
  Height: 23.96″ (610 mm)
  Length: 30.79″ (780 mm)
  Width: 26.97″ (680 mm)
• Weight: 

          165 lbs. (75 kg)

• Standard Label Dimensions:
  Label Width: Up to 7.2″ (183 mm)
  Label Length: Up to 7″ (178 mm)
  (Printer dependent)
• Dispense Speed: 

         Up to 16″ (305 mm) per second depending on printer and label size

• Label Dispense Accuracy: 

         Up to +/- 1/32″ (.8 mm)

• Electrical: 

         115 Volts AC 60 Hz 5 Amps. 220 Volts AC 50 Hz 2.5 Amps.

• Air (as needed): 

         4 cfm at 90 psi for most applications

• Options:
  Most O.E.M. print engines
  17″ (43 m) powered unwind
  Label on pad detection
  Air-Blow conversion
  90° swing tamp configuration
  Dual Action Tamp (DAT) configuration
  3-color light stack

Brochure