360a High Speed Label Applicator
Description
Features
The CTM 360a HS Series Label Applicator is a rugged, versatile applicator loaded with standard features that are optional on most other applicators. The 360a HS Series Applicator can be configured as a blow on, merge or tamp applicator. Each module can also be easily switched from right to left hand dispensing mode. Each applicator is equipped with a 20″ non-powered unwind/powered rewind.
Labeling Speeds
Programmable to 1500 inches per minute, to 2100 inches per minute, with oversize unwind and rewind. Programmed with speed profiling ability.
Product Sensing Retro-reflective scanner provided as standard, other types available.
The CTM 360a HS Series Label Applicator is a rugged, versatile applicator loaded with standard features that are optional on most other applicators. The 360a HS Series Applicator can be configured as a blow on, merge or tamp applicator. Each module can also be easily switched from right to left hand dispensing mode. Each applicator is equipped with a 20″ non-powered unwind/powered rewind.
Labeling Speeds
Programmable to 1500 inches per minute, to 2100 inches per minute, with oversize unwind and rewind. Programmed with speed profiling ability.
Product Sensing Retro-reflective scanner provided as standard, other types available.
Specifications
Voltage 108-132 VAC
Frequency 50/60 Hz
Phase Single
Current 10 amps
Air Consumption @ 60-90 psi. Up to 4 CFM
Label Placement +/- 1/32" in
Air Blow Width 39 in
Air Blow Height 38 1/2 in
Air Blow Depth 27 1/2 in
Merge Width 43 in
Merge Height 40 in
Merge Depth 27 1/2 in
Tamp Width 42 in
Tamp Height 37 in
Tamp Depth 27 1/2 in
Label Sizes
Min. Air Blow (W x L) 3/4 x 3/4 in
Max. Air Blow (W x L) 5 x 5-1/2 in
Min. Merge (W x L) 3/4 x 3/4 in
Max. Merge (W x L) 5 x 20 in
Min. Tamp (W x L) 3/4 x 3/4 in
Max. Tamp (W x L) 5 x 10 in
Label Roll Size
Max. OD Core 20 in
Max. ID Core 3 in
Optional 16" OD x 3"or 6" ID cores
Frequency 50/60 Hz
Phase Single
Current 10 amps
Air Consumption @ 60-90 psi. Up to 4 CFM
Label Placement +/- 1/32" in
Air Blow Width 39 in
Air Blow Height 38 1/2 in
Air Blow Depth 27 1/2 in
Merge Width 43 in
Merge Height 40 in
Merge Depth 27 1/2 in
Tamp Width 42 in
Tamp Height 37 in
Tamp Depth 27 1/2 in
Label Sizes
Min. Air Blow (W x L) 3/4 x 3/4 in
Max. Air Blow (W x L) 5 x 5-1/2 in
Min. Merge (W x L) 3/4 x 3/4 in
Max. Merge (W x L) 5 x 20 in
Min. Tamp (W x L) 3/4 x 3/4 in
Max. Tamp (W x L) 5 x 10 in
Label Roll Size
Max. OD Core 20 in
Max. ID Core 3 in
Optional 16" OD x 3"or 6" ID cores