Description

Label-Aire’s custom solution was to modify its rugged Inline Series 6000 open-frame labeling system to accommodate a total of three 3115 Wipe-On applicators. One applicator was mounted near the infeed side of the system for neck labeling. The remaining two applicators were placed on opposite sides of the 14 foot long conveyor for front/back labeling. A chain aligner was also mounted near the infeed side to align the oval-shaped containers prior to reaching the top trap hold down unit. Custom layered wipe-down squeegees were designed to provide superior clear label placement. Label-Aire’s Inline Series 6000 Front/Back & Neck Labeling System was the right machine for the customer. It provided accurate and bubble-free clear label placement reliably and at higher speeds.

SPECIFICATION 

•  Dimensions: 

          Height: 33.3″ (846 mm)
          Length: 33.3″ (846 mm)
          Width: 28.6″ (726 mm)

• Dimensions:
  Height: 23.96″ (610 mm)
  Length: 30.79″ (780 mm)
  Width: 26.97″ (680 mm)
• Weight: 

          165 lbs. (75 kg)

• Standard Label Dimensions:
  Label Width: Up to 7.2″ (183 mm)
  Label Length: Up to 7″ (178 mm)
  (Printer dependent)
• Dispense Speed: 

         Up to 16″ (305 mm) per second depending on printer and label size

• Label Dispense Accuracy: 

         Up to +/- 1/32″ (.8 mm)

• Electrical: 

         115 Volts AC 60 Hz 5 Amps. 220 Volts AC 50 Hz 2.5 Amps.

• Air (as needed): 

         4 cfm at 90 psi for most applications

• Options:
  Most O.E.M. print engines
  17″ (43 m) powered unwind
  Label on pad detection
  Air-Blow conversion
  90° swing tamp configuration
  Dual Action Tamp (DAT) configuration
  3-color light stack

Brochure